Cup Wrap Instructions

How to apply UV wraps:

  1. Measure cup and decal wrap. Trim excess from all sides of decal as necessary to avoid the wrap overlapping when applied on the cup.
  2. Peel decal wrap off the white backing (we recommend cutting the decal backing into smaller section and placing it on the cup in section).
  3. Line the decal film onto the cup and start from one side slowly pressing the wrap down. The adhesive is very strong, once applied to the cup it cannot be removed!
  4. Using a squeegee, rub the decal really well to properly adhere and work out any air bubbles (the more rubbing the better)
  5. Peel off the clear film slowly and clearly to make sure you get everything off.

*** Hand wash only!! NOT recommended for use in dishwasher or microwave. NOT recommended for use on cup with sublimation coating.

Please note, not all glass/cups are the exact same size, measure your cups and wraps first trim the excess for better result.